Transmission Control Replacement
Removal Procedure
2. |
Unlock shift lever and
selector lever cable adjust locks (2). |
3. |
Clip shift lever and selector
lever cable (3) out of transmission control lever housing
(1). |
4. |
Remove 4 transmission control
lever bolts (1). |
5. |
Remove transmission control
lever (2). |
Installation Procedure
1. |
Install NEW transmission
control lever (2). |
2. |
Install 4 transmission control
lever bolts (1) and tighten to 8 N·m (71 lb
in) . |
3. |
Slide shift lever and selector
lever cable into shift lever and selector lever cable adjust locks
(2). |
4. |
Clip shift lever and selector
lever cable (3) into transmission control lever housing (1).
|
|