vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Transmission Control Replacement > < Transmission Rear Mount Replacement - Hydraulic Power Steering

Transmission Mount Bracket Replacement - Rear

Removal Procedure

1. Raise vehicle. Refer to Lifting and Jacking the Vehicle .
2. Support rear of powertrain using a suitable jack stand.

           2191540



3. Remove transmission rear mount bolt (1).

           2191541



4. Remove 3 transmission rear mount bolts (1).
5. Remove transmission rear mount (2).

Installation Procedure


           2191541



1. Install transmission rear mount (2).

Caution: Refer to Fastener Caution .

2. Install 3 transmission rear mount bolts (1) and tighten to 100 N·m (74 lb ft) .

           2191540



3. Install transmission rear mount bolt (1) and tighten to 100 N·m (74 lb ft) .
4. Remove jack stand.
5. Lower vehicle.

Transmission Control Replacement > < Transmission Rear Mount Replacement - Hydraulic Power Steering