System 6, 2-C Acrylic-coat for 1-coat Paint
Applications
System 6
Individual part paint application
|
2-C-acrylic top coat paint
Plastocryl
|
Paint repair
|
Surface:
|
Plastic:
|
|
Glass-fibre reinforced plastic (GRP), polycarbonate (PC),
polyurethane (PUR), polyamide (PA), polypropylene (PP/EPDM),
acrylonitrile-butadiene styrene (ABS), on primed new parts and
production paint applications (Uni-1-coat paint applications)
|
Operational procedure
|
Paint stage
|
Products
|
Notes
|
|
I
|
II
|
III
|
|
|
Clean
|
x
|
x
|
x
|
Antistatic cleaner
|
Spray on using pump atomiser and dry with highly absorbent
cloth.
|
Sand
|
x
|
x
|
x
|
Wet sandpaper
|
Sand down fault site with grain no lower than P 800. Give a matt
finish to remaining surface using sanding/matting pad fine, blend
prep.
|
Prime
|
–
|
x
|
x
|
Plastic primer
|
Spray two layers. Setting time 5 minutes. Paint stage II
includes minor repairs (no putty application).
|
Sand
|
–
|
x
|
x
|
Sanding/matting pad fine
|
After drying, only if required.
|
Clean
|
–
|
x
|
x
|
|
Only if required. Remove dust with tack cloth.
|
Elasticate top coat paint
|
x
|
x
|
x
|
2-C-acrylic top coat paint Plastocryl
|
Elasticate top coat paint. 100 Parts – top coat paint 20
Parts – plastocryl
|
Spray top coat paint
|
x
|
x
|
x
|
Elasticated top coat paint 2-C-MS hardener 30 Universal
thinner
|
100 Parts – elasticized top coat paint 50 Parts –
hardener 10 Parts – thinner Spray one layer. Setting time 3
to 5 minutes. Final spraying with one more layer. Setting time
prior to oven drying 5 minutes.
|
|