Vauxhall Workshop Service and Repair Manuals

B-03, F0: DATA LIST
Test	Work Order Description		Nominal Value
T02	Tester Display   SQUIB DRIVER
	•  Ignition ON   •  Engine OFF   •  All consumers turned off   •  Turn steering wheel very slowly to stop in both directions.		less than 100 %   Value has to be approximately constant; there must be no large oscillations
	Note:   The diagnostic tester only displays a relative value; i.e. it is used for recognition of variations in the squib circuit impedance, caused by an intermittent problem for example.   The displayed value is usually greater than 0 % but less than 100 %. It indicates an open circuit if the value is greater than 200 %.   The steering wheel must be turned very slowly if an intermittent problem is to be recognised, as the diagnostic tester display is only updated once a second.
	Concerned Terminals:   1, 2
	Yes: T03	No: C-04