vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Steering Column Assembly, Remove and Install (Vehicles with Airbag/without EPS) > < Upper Steering Shaft Ball Bearing, Replace (Vehicles with Airbag/without EPS)

Corsa B

 

Lock Cylinder for Steering and Ignition Lock, Remove and Install (Vehicles with Airbag)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Unbolt lower signal switch panelling. Illustration shows the panelling without steering gear for clearer representation.  

Turn key in lock cylinder to position "II". Press down lock spring of lock cylinder.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Object Number: 2385196 Size: DEFAULT

Insert lock cylinder with ignition key in lock cylinder casing.  

Ensure that the lock cylinder and the contact part are in the same position.  

Fasten two-piece signal switch panelling. Install rubber cover on casing for steering and ignition lock.  

Object Number: 2389570 Size: DEFAULT

 

 

Steering Column Assembly, Remove and Install (Vehicles with Airbag/without EPS) > < Upper Steering Shaft Ball Bearing, Replace (Vehicles with Airbag/without EPS)