Remove load compartment cover and fold rear seat backrest forwards. For Model F 35: Release upholstery (rear side) from underbody. Unscrew panel (1) and hinge (2) from wheel well. Fold back rear seat backrest halves, unscrew from centre bearing (3) and remove seat halves. Proceed analogously on other side.
Install, Connect Insert rear seat backrest halves, bolt to centre bearing (3) - 20 Nm / 15 lbf. ft., fold forwards and bolt hinge to wheel well (2) - 30 Nm / 22 lbf. ft. Attach wheel well panel (1). Proceed analogously on other side. Install load compartment cover. |