Retaining Clamp - Rear Seat Backrest (Split), Remove and Install - as of MY '96
Retaining Clip for Rear Seat Backrest, Split, Remove and Install - as of MY '96
Remove, Disconnect
Fold rear seat backrest forwards and detach panelling (3). Loosen fastening bolts (2) and remove retaining clip (1).
Install, Connect
Insert retaining clip (1) and fasten - 20 Nm / 15 lbf. ft. Fold seat backrest back and check that retaining clip engages in catch without jamming. If retaining clip jams or scrapes, loosen bolts again and correct position accordingly. Repeat check. Install panelling (3) and fold rear seat backrest back.