Upholstery for Rear Seat Backrest, One-piece, Remove and Install or Replace - Model 71
 Remove, Disconnect If present, release headrest by pressing 2 snap buttons on the locking sleeves and remove by pulling up out of seat backrest. Remove rear seat - see corresponding operation. | 
|
Unbolt left and right shackles from rear seat backrest. | 
|
Remove, Disconnect Remove cardboard edge of upholstery out of mounting frame of seat backrest frame. If present, remove headrest guide sleeves - see corresponding operation. Pull upholstery over actuating lever and remove from padding. | 
|
 Install, Connect Pull upholstery over actuating lever and downwards over padding and seat backrest frame. Guide cardboard edge of upholstery into mounting frame of seat backrest frame. If present, press headrest guide sleeves into special opening. Bolt on right and left shackle covers with shackles. Install rear seat backrest - see corresponding operation. If present, insert headrests in guide sleeves and engage. | 
|
|
