Upholstery - Rear Seat Backrest, Remove and Install (Leather Version)
Remove, Disconnect
Rear seat backrest - see operation "Rear Seat Backrest, Remove and Install (Split) - as of MY '96".
Detach headrest, upholstery (rear side) - KM-569-A, detach upholstery from entire perimeter of rear seat backrest frame, unclamp upholstery from squab, drive out headrest guide sleeve upward, remove upholstery.
Install, Connect
Clamp upholstery on squab, upholstery on rear seat backrest frame, upholstery on rear side, headrest guide sleeves, headrest, rear seat backrest.
Remove, Disconnect 
Install, Connect 