Vauxhall Workshop Service and Repair Manuals

Crank Drive, Adjust  

  Adjust   

Place crank on drive - pin points forwards towards vehicle front.

Wind crank clockwise until stop. Wind back crank 3 full turns until it catches. If crank cannot be turned fully, replace crank drive. (Arrow I in illustration points towards front of vehicle)     1  Pinion   2  Straight spline (for crank)   3  Slanted spline (for control cables)   4  Pin (points towards front)       Important!    With manual drive the crank remains in "open position" after 8 turns. By pressing down button and performing 2 additional turns of the crank the shell moves to final position.