C-04, brake light circuit |
Test |
Work order description |
Nominal value |
T01 |
Check: Function of brake lights |
|
|
• Ignition ON • Note brake light switch • Actuate brake pedal |
Do not light Do light |
|
Yes: T02 |
No: E01 |
T02 |
Check: Circuit - interruption of the signal circuit |
|
|
• Ignition OFF • Disconnect wiring harness plug from: |
less than 1 Ω |
|
K50 ABS control unit |
|
|
• Measure resistance between following terminals: |
|
|
K50 ABS control unit Wiring harness plug terminal 14 & Brake light switch S8 Wiring harness plug (black/yellow) |
|
|
Yes: E04 |
No: T03 |
T03 |
Check: Circuit - interruption of the signal circuit |
|
|
• Disconnect wiring harness plug from: |
less than 1 Ω |
|
Instrument panel X6 & front body 45P |
|
|
• Measure resistance between following terminals: |
|
|
K50 ABS control unit Wiring harness plug terminal 14 & Instrument panel X6 & front body 45P Wiring harness plug terminal 64 (plug pin) |
|
|
Yes: E03 |
No: E02 |