C-06, front right wheel sensor |
Test |
Work order description |
Nominal value |
T01 |
Check: Circuit interruption of the signal circuit |
|
|
• Ignition OFF • Disconnect wiring harness plug from: |
0.5...2.5 k Ω |
|
K50 ABS control unit |
|
|
• Measure resistance between following terminals: |
|
|
K50 ABS control unit Wiring harness plug Terminal 3 & K50 ABS control unit Wiring harness plug terminal 5 |
|
|
Yes: T03 |
No: T02 |
T02 |
Check: components |
|
|
• Disconnect wiring harness plug from: |
0.5...2.5 k Ω |
|
X32 front body & front wheel sensor, ABS 2P |
|
|
• Measure resistance between following terminals: |
|
|
X32 front body & front wheel sensor, ABS 2P Wiring harness plug terminal 1 (component side) & X32 front body & front wheel sensor, ABS 2P Wiring harness plug terminal 2 (component side) |
|
|
Yes: E01 |
No: E02 |
T03 |
Check: Short circuit to ground of the signal circuit |
|
|
• Measure resistance between following terminals: |
greater than 100 k Ω |
|
K50 ABS control unit Wiring harness plug terminals 3 and 5 & Ground |
|
|
Yes: T05 |
No: T04 |
T04 |
Check: components |
|
|
• Disconnect wiring harness plug from: |
greater than 100 k Ω |
|
X32 front body & front wheel sensor, ABS 2P |
|
|
• Measure resistance between following terminals: |
|
|
X32 front body & front wheel sensor, ABS 2P Wiring harness plug terminals 1 and 2 (component side) & Ground |
|
|
Yes: E03 |
No: E02 |
T05 |
Check: Short circuit of the signal circuit |
|
|
• Ignition ON • Measure voltage between following terminals: |
less than 0.1 V |
|
K50 ABS control unit Wiring harness plug terminals 3 and 5 & Ground |
|
|
Yes: T06 |
No: E04 |
T06 |
Check of the sensors signal circuit |
|
|
• Ignition OFF • Wiring harness plug connect from: |
greater than 1 km/h |
|
K50 ABS control unit |
|
|
• Ignition ON • Select using TECH1: |
|
|
F0:DATA LIST NO. T06 FR WHEEL SPEED |
|
|
Yes: E05 |
No: E02 |