Vauxhall Workshop Service and Repair Manuals

Recommended Torque Values  

	Nm
Brake pressure hose to brake caliper (banjo bolt)	40
Brake fluid reservoir to bulkhead	3 1)
Brake proportioning valve to vehicle underbody	20 1)
Brake servo to bulkhead	22 1)
Brake line to brake pressure hose	16
Brake line to brake proportioning valve	16
Brake line to brake master cylinder	16
Brake line to connecting piece	16
Brake pedal to pedal support	18
Brake caliper to brake carrier (guide pin)	30
Brake disc to wheel hub	7
Brake carrier to steering knuckle	95
Brake drum to wheel hub	4

1)  Use new fastening nuts.  

Recommended Torque Values (Continued)  

	Nm
Brake proportioning valve adjuster to adjuster bracket	20
Bleeder valve to brake caliper	6
Bleeder valve to wheel brake cylinder	6
Brake master cylinder bracket to bulkhead	20 1)
Hydraulic modulator bracket to support plate	20
Tension spring bracket for brake proportioning valve to rear spring (Model 71 Combo)	20
Parking brake lever to vehicle underbody	20
Master brake cylinder to brake servo	22 1)
Brake master cylinder to bracket	12
Hydraulic modulator to upper bracket (rubber bearing)	8
Clutch pedal support to bulkhead	22 1)
Wheel to wheel hub	110
Wheel brake cylinder to brake anchor plate	9

1)  Use new fastening nuts.  

Recommended Torque Values (Continued)  

	Nm
Wheel spindle with brake anchor plate to rear axle body (except Model 71 Combo)	50 + 30 ° + 15 ° 1)
Wheel spindle with brake anchor plate to rear axle body (Model 71 Combo)	65
Parking brake telltale switch to parking brake lever	2,5
Wiper arm to wiper linkage	11
Wheel speed sensor to steering knuckle	8
Wheel speed sensor to brake anchor plate	4
Shock absorber to rear axle	65
Shock absorber to rear axle (Model 71 Combo)	70
Heat shield to vehicle underbody	2

1)  Use new fastening nuts.