Vauxhall Workshop Service and Repair Manuals

Crank Drive (Continued)  

Crankshaft  

Engine		15 D (4EC1), 15 DT, X 15 DT (T4EC1), 17 D, X 17 D (4EE1)
Crankshaft and con-rod bearing journals
Permissible out-of-round	mm	0.025
Permissible taper	mm	0.025
Radial runout	mm	Permissible difference of central crankshaft bearing journal on installation of crankshaft in cylinder block: 0.00 to 0.06
Permissible axial play	mm	0.06 to 0.30
Permissible main bearing play	mm	0.03 to 0.08
Permissible con-rod bearing play	mm	0.025 to 0.100
Permissible con-rod lateral play	mm	0.20 to 0.40