Remove air cleaner housing and air duct pipe - see illustration "Air Ducts (X 14 XE, C 14 SEL, X 16 XE, C 16 SEL)" or "Air Ducts (C 16 XE)". Mark direction of travel of ribbed v-belt. Tension ribbed V-belt tension roller (1) in direction of arrow (anti-clockwise) and remove ribbed V-belt.
Install, Connect Install ribbed V-belt and tension with ribbed V-belt tensioner. Note ribbed V-belt running direction and installation position. Remove air cleaner housing and air duct pipe - see illustration "Air Ducts (X 14 XE, C 14 SEL, X 16 XE, C 16 SEL)" or "Air Ducts (C 16 XE)". |