Vauxhall Workshop Service and Repair Manuals

Toothed Belt Guide Roller, Remove and Install  

  Remove, Disconnect   

Install air cleaner housing - see illustration "Air Ducts (X 14 XE, C 14 SEL, X 16 XE, C 16 SEL)" or "Air Ducts (C 16 XE)".  

Remove upper part of toothed belt cover - see operation "Toothed Belt Cover - Upper Part, Remove and Install".  

For version without AC: remove ribbed V-belt - see operation "Ribbed V-belt, Remove and Install (Vehicles without Power Steering and AC)" or "Ribbed V-belt, Remove and Install (Vehicles with Power Steering)".  

For version with AC: detach ribbed V-belt from alternator pulley and set aside (do not remove) - see operation "Ribbed V-belt, Remove and Install (Vehicles with Power Steering and AC)".  

Remove toothed belt cover - lower part - see operation "Toothed Belt Cover - Lower Part, Remove and Install".  

Remove toothed belt - see operation "Toothed Belt, Remove and Install".  

  Remove, Disconnect   

Remove toothed belt guide roller (1) intake side or toothed belt guide roller (2) exhaust side from cylinder head.     Install, Connect    Attach toothed belt guide rollers to cylinder head - tightening torque 25 Nm / 18 lbf. ft.     Important!    Toothed belt guide roller with larger diameter is installed on intake side.

  Install, Connect   

Install toothed belt - see operation "Toothed Belt, Remove and Install".  

Install toothed belt cover - lower part - see operation "Toothed Belt Cover - Lower Part, Remove and Install".  

Install ribbed V-belt - see operation "Ribbed V-belt, Remove and Install (Vehicles without Power Steering and AC)" or "Ribbed V-belt, Remove and Install (Vehicles with Power Steering)" or "Ribbed V-belt, Remove and Install (Vehicles with Power Steering and AC)".  

Install upper part of toothed belt cover - see operation "Toothed Belt Cover - Upper Part, Remove and Install".  

Install air cleaner housing - see illustration "Air Ducts (X 14 XE, C 14 SEL, X 16 XE, C 16 SEL)" or "Air Ducts (C 16 XE)".