vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Charge Current Control Relay, Remove and Install > < Pre-heater Relay, Check

Corsa B

 

Glow Control Unit, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Disconnect ground cable from battery. Remove right storage tray. Remove door weatherstrip from lower A pillar area. Unscrew snap button and remove panelling.  

Object Number: 2389715 Size: DEFAULT

 

 

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove wiring harness plug from glow control unit. Unclip glow control unit from bracket and remove.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Insert glow control unit in bracket. Connect wiring harness plug.  

Install A pillar panelling. Press in snap button. Install door weatherstrip. Install right storage tray. Connect ground cable to battery.  

Object Number: 2385400 Size: DEFAULT

 

Charge Current Control Relay, Remove and Install > < Pre-heater Relay, Check