vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Component Locator > < Starter, Assemble (Valeo)

 

Installed Starter, Check  

Object Number: 616196  Size: DEFAULT  Inspect   

Test conditions: battery fully charged and ground connection correct.  

Check starter cable: correct connection to starter and to battery positive terminal, maximum permissible voltage loss in cable should not be greater than 0.5 V when starting - measure voltage at starter terminal "50". If voltage loss is larger: check contact parts of ignition lock, selector lever switch, plug connector for adequate contact.  

Check starter: connect Opel/Vauxhall tester - proceed as specified in User's Manual.  

Notice: 

Do not perform a short-circuit check: risk of damage to collector.  

 

 

Component Locator > < Starter, Assemble (Valeo)