Special Service Tools
KM-128-A |
Tension Gauge |
|
To check the V-belt tension |
KM-134-A |
Socket Wrench |
|
To remove and install cylinder head bolts |
KM-161-B |
Bearing Puller |
|
To remove toothed belt drive gear from crankshaft |
KM-226-A |
Measuring Device |
|
To adjust beginning of supply with MKM-571-B |
KM-232 |
Adapter |
|
To check oil pressure with KM-498-B |
KM-252-2-B |
Cable |
|
To remove and install engine |
|
|
Special Service Tools (Continued)
KM-263-B |
Engine Bridge |
|
To suspend engine with engine lifter and cable from KM-252-2-B |
KM-340-G |
Cutter Set |
|
To mill, rework valve seats |
KM-348 |
Spring Compressor |
|
To compress valve spring in conjunction with KM-653-A with cylinder head removed |
KM-412 |
Engine Overhaul Stand |
|
To hold the removed engine |
KM-412-11-B |
Adapter |
|
To hold engine in conjunction with KM-412 |
KM-470-B |
Angular Torque Wrench |
|
To tighten cylinder head bolts |
|
|
Special Service Tools (Continued)
KM-471 |
Adapter |
|
To check cooling system with cooling system tester diagnosis on cooling system |
KM-498-B |
Oil Pressure Manometer |
|
To check the engine oil pressure in conjunction with KM-232 |
KM-517-B |
Flywheel Locking Device |
|
To lock flywheel |
KM-533-B |
Adapter |
|
To check compression using KM-649 |
MKM-571-B |
Dial Gauge |
|
To measure beginning of delivery in conjunction with KM-226-A |
MKM-604-D |
Torx Bit and Socket Set |
|
To remove and install Torx bolt |
|
|
Special Service Tools (Continued)
KM-609 |
Electronic-Kit |
|
Diagnosis of electrical and electronic systems |
MKM-610 |
Torque Wrench, 1/2" |
|
Range 30 - 130 Nm / 22 - 96 lbf. ft. |
MKM-611 |
Torque Wrench, 3/8" |
|
Range 10 - 60 Nm / 7 - 44 lbf. ft. |
KM-648 |
Oil Filter Wrench |
|
To remove and install oil filter |
KM-649 |
Adapter |
|
To check compression in conjunction with KM-533-A |
KM-650-A |
Valve Compressor |
|
To adjust valve clearance |
|
|
Special Service Tools (Continued)
KM-651-A |
Remover |
|
To remove injection pump gear with engine installed |
KM-652 |
Flywheel Locking Device |
|
To lock flywheel |
KM-653-A |
Adapter |
|
To compress valve springs in conjunction with KM-348 |
KM-654 |
Remover/Installer |
|
To remove and install valve guide |
KM-655 |
Installer |
|
To install piston cooling (oil nozzle) |
KM-656 |
Installer |
|
To install front crankshaft and camshaft seal ring |
|
|
Special Service Tools (Continued)
KM-657 |
Installer |
|
To install oil pump seal ring in oil pump bracket |
KM-658 |
Installer |
|
To install rear crankshaft seal ring in seal ring bracket |
KM-659-A |
Guide Drift |
|
To centre clutch disc |
KM-660 |
Installer |
|
To install front camshaft seal ring (engine removed) |
MKM-667 |
Pressure and Vacuum Pump |
|
To measure turbocharger charge pressure |
MKM-669 |
Torque Wrench, 1/2" |
|
Range 50 - 300 Nm / 37 - 221 lbf. ft. |
|
|
Special Service Tools (Continued)
KM-728 |
Remover/Installer Wrench |
|
To remove and install injector nozzles |
KM-734 |
Guide Drift |
|
To centre clutch disc |
KM-798 |
Dial Gauge |
|
To measure beginning of delivery |
MKM-883-1 |
Engine Bridge |
|
To hold the engine |
KM-884 |
Oil Filter Wrench |
|
To remove and install oil filter |
KM-904 |
Base Frame |
|
To remove and install various vehicle components with additional adapters |
|
|
Special Service Tools (Continued)
KM-6054 |
Engine Mount |
|
To remove and install engine |
|
|
|