vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:TROUBLE CODE TABLE Trouble Code 44 LEAN EXHAUST > < F2:TROUBLE CODE TABLE Trouble Code 13 02 SENSOR OPEN CIRCUIT

MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14 NZ)      F2:TROUBLE CODE TABLE

 

 

Trouble

Code

 

Information Sensor

Cause of Fault

Remedy in

F0:DATA LIST

No.

 

Trouble Code Storage when ...

 

Remarks

35

IDLE

AIR CONTROL 

 

06

·   Engine running at idle speed

·  Vehicle speed less than 1 km/h (0.6 mph)

·  Coolant temperature higher than 75 °C/167 °F

·   Throttle valve aperture less than 2 %

·  Following trouble codes not stored: 21, 22, 24

·  Nominal idle speed is not maintained; the deviation

     is greater than 75 rpm

·   The above conditions must be fulfilled for at least 19 s

     Only for control units up to Model Year 91: C 14 NZ

·   The above conditions must be fulfilled for at least 1 s

     Only for control units as of Model Year 92: C 12 NZ,

     C 14 NZ

 

 

If the speed sensor has malfunctioned and trouble code 24 has not yet been recognized, trouble code 35 may be set under certain circumstances.

 

 

 

 

 

 

 

 


Related Literature Units
-Quick Check F0:DATA LIST No.06 IDLE AIR CONTROL

F2:TROUBLE CODE TABLE Trouble Code 44 LEAN EXHAUST > < F2:TROUBLE CODE TABLE Trouble Code 13 02 SENSOR OPEN CIRCUIT