vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Intake Pipe Pressure Sensor > < F2:TROUBLE CODE TABLE Trouble Code 22 THROTTLE POSIT. SENSOR VOLTAGE LOW

MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14 NZ)      Quick Check F0: DATA LIST 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Ter-

minal

04

TPS SIGNAL 

 

Ignition ON

Engine OFF

Engine throttle valve CLOSED (accelerator pedal in idle position)

 

 

Engine throttle valve OPEN (accelerator pedal fully depressed)

 

Note:

The % value in the TECH 1 display should be lower than 2% at idle speed. If the % value in mode "F8", submode "RPM CONTROL" is greater than 2%, although the throttle valve is closed, with a constant voltage, the control unit has taken the replacement value for the throttle valve potentiometer from the engine speed table and determined a fault in the potentiometer. Trouble code 21 or 22 set.

Mode "F8", submode "RPM CONTROL" no longer functions if trouble code 21 or 22 was recognized.

 

 

 

 

0 to 2 %

0.3 to 1 V

 

 

approx. 100 %

3.8 to 4.8 V

 

21, 22

C 14,

C 13 /

D 2

 

 

 

 

 


Related Literature Units
-F2:TROUBLE CODE TABLE Trouble Code 21 THROTTLE POSIT. SENSOR VOLTAGE HIGH
-

Intake Pipe Pressure Sensor > < F2:TROUBLE CODE TABLE Trouble Code 22 THROTTLE POSIT. SENSOR VOLTAGE LOW