Corsa B
Check Data List Parameters
· Using TECH 1, it is possible to display the various input and output parameters (actual values) of an electronic vehicle system. · The "Quick Check F0:DATA LIST" table shows the nominal values for each system parameter. · These nominal values ("Quick Check F0:DATA LIST" table) can be compared with the actual values (TECH 1 Display) for evaluation of the system status. Procedure: - Observe the actual values displayed by TECH 1 over a period of time (depending on the relevant parameter); - During observation, determine an average value; - Compare this average value with the prescribed nominal value. · The column "Terminals" indicates the affected terminal for each control unit and, when used together with the system's circuit diagram, enables more thorough diagnosis. · If the TECH 1 displays "NOT USED", this indicates that this parameter is not evaluated by the system.
|