vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Table 2, Trouble Code Table - TC 81 INJECTOR VALVE VOLTAGE HIGH > < Quick Check F0:DATA LIST No.24 INJECTION PULSE

Corsa B

Multec-M (14 SE / C 14 SE / C 16 SE) F2: TROUBLE CODE

 

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when ...

25

INJECTOR VALVE VOLTAGE LOW

24

·   The control unit has determined a voltage condition at the output to the injector which does not correspond to the nominal value (3 consecutive 0 V to 12 V transitions were not registered)

 

The fault (lead interruption/short circuit to ground) is recognized when the ignition is switched on and after the switch-on test.

Short circuit to ground:

Injector is always actuated

Engine does not start

The catalytic converter may become damaged

Interruption:

The injector is no longer actuated

 

 

 

 

 
Related Literature Units
-F0:Data List - Test Step 24 INJECTION PULSE

Table 2, Trouble Code Table - TC 81 INJECTOR VALVE VOLTAGE HIGH > < Quick Check F0:DATA LIST No.24 INJECTION PULSE