Corsa B
Immobiliser with Transponder - as of MY '96 Immobiliser Control Unit, Remove and Install Important! If the control unit is replaced, it must be reprogrammed - see corresponding Checking Procedures. Notice: There are two different installation sequences due to the different versions of the ignition lock housing. If being replaced, immobiliser control units without tabs can be replaced by control units with tabs. New ignition lock trims are necessary for control units with tabs. These may also be used for control units without tabs.
Option 1: Ignition lock housing without tabs Remove, Disconnect
Install, Connect
Option 2: Ignition lock housing with tabs (arrow) Remove, Disconnect
|
||||||||||