If trouble
codes 63 and 64 are recognised simultaneously:
· Engine not
running: The injectors for cylinder pairs 1-4 and 2-3 are switched off
· Engine
running: Only the injector pair where the fault occurred first is
switched off.
or:
· System is not in
TECH 1 diagnostic mode
· Final stage diagnosis in
control unit:
Incorrect voltage condition at output Ter. F14 of control
unit (circuit interruption)
· With ignition ON, the
fault is recognised immediately
Effects:
· The injectors for
cylinder pairs 1-4 and 2-3 are switched off
· The engine does not start
· The engine telltale is ON
|