Vauxhall Workshop Service and Repair Manuals

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when ...

75

TORQUE CONTROL VOLTAGE LOW

48

·   The fault is recognised by the control unit if the voltage signal for torque control at input Ter. E10 is low for longer than 10 s

     (short circuit to ground or circuit interruption)

or

·   Incorrect signal from AT control unit:

     The fault is recognised by the control unit if the voltage signal for torque control is low for longer than 30 ms after shifting

Effects:

·   The engine telltale is ON

·   Ignition is not retarded during AT shifting (rough shifting)