C-36, Deceleration Fuel Cutoff Circuit
Test
Work Order Description
Nominal Value
T01
Check: Component
• This parameter is an internal value of the control unit.
• Check the following component for proper operation: TPS SIGNAL MAP SENSOR COOLANT TEMP. ENGINE SPEED VEHICLE SPEED
Test okay?
Yes: T02
No: E03
T02
Check: Adjustment
• Are you using the latest version of control unit software?
System okay?
Yes: E01
No: E02
Result
Cause Of Fault
E01
• If programming/nominal value is okay and system is still faulty the following component is defective: K57 Control Unit - Multec
E02
• Perform service programming SPS to download the latest version of control unit software into the control unit.
E03
• Repair the concerned circuit/component.
