Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

38

DESIRED IDLE P-N

AT vehicles:

Ignition ON

Engine running at idle speed, operating temperature

Nominal idle speed for selector lever positions "P" and "N" has not been altered (basic adjustment after control unit reset)

-

-

X 14 XE AT:

900 rpm

Nominal idle speed for selector lever positions "P" and "N" has been programmed.

The nominal engine idle speed set in F6: Miscellaneous Tests, F0: Adjustments must appear in this display

Note:

The nominal engine speed is a programmable value.

If F0:DATA LIST no.: 39 is ACTIVE, the nominal engine speed has been reprogrammed.

If F0:DATA LIST no.: 39 is INACTIVE, the nominal engine speed has not been altered or the control unit has been reset. In this case, ignore this TECH 1 display. A randomly selected value will be displayed