vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:Trouble Codes - Trouble Code No. 47 LINEAR EGR POSITION > < F2:Trouble Codes - Trouble Code No. 19 INCORRECT RPM SIGNAL

Multec- S X 14 XE / X 16 XE(L)        F2:TROUBLE CODES

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when...

43

LINEAR EGR SYSTEM

24, 25

·   Self- test of exhaust gas recirculation system (exhaust stream measurement):

     The control unit measures the intake manifold pressure immediately before and during the self- test of the exhaust gas recirculation system.

     The control unit recognises a difference lower than 5 kPa (50 mbar).

·   Above condition must be fulfilled twice

 

Effects:

·   The exhaust gas recirculation system is switched off

 

 

 

 

 

 

 

 


Related Literature Units
-F0:Data List Test Step 24 EGR POSITION CMD
-

F2:Trouble Codes - Trouble Code No. 47 LINEAR EGR POSITION > < F2:Trouble Codes - Trouble Code No. 19 INCORRECT RPM SIGNAL