vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:Trouble Codes - Trouble Code No. 52 SECOND. AIR PUMP RELAY VOLTAGE LOW > < F2:Trouble Codes - Trouble Code No. 33 MAP SENSOR VOLTAGE HIGH

Multec- S X 14 XE / X 16 XE(L)        F2:TROUBLE CODES

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when...

34

MAP SENSOR VOLTAGE LOW

06

 

·   Engine speed higher than 1050 rpm

·   Following trouble code not stored: 21

·   Throttle valve opening greater than 18.8 %

·   Intake manifold absolute pressure lower than 14 kPa (140 mbar)

·   Above conditions must be fulfilled for at least 0.06 s.

 

or

 

·   Engine speed lower than 1050 rpm

·   Following trouble code not stored: 21

·   Intake manifold absolute pressure lower than 14 kPa (140 mbar)

·   Above conditions must be fulfilled for at least 0.06 s.

 

Replacement value:

·   Engine not running:       Intake manifold pressure equals 90 kPa

·   Engine running:             The control unit calculates the intake manifold pressure depending on the engine speed and the throttle valve position

 

Effects:

·   The secondary air injection is switched off

·   The long- term correction of the mixture adaptation is switched off

 

 

 

 

 

 

 

 


Related Literature Units
-F0:Data List Test Step 06 MAP SENSOR

F2:Trouble Codes - Trouble Code No. 52 SECOND. AIR PUMP RELAY VOLTAGE LOW > < F2:Trouble Codes - Trouble Code No. 33 MAP SENSOR VOLTAGE HIGH