vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODE TABLE - Trouble Code 64 EST LINE COIL CYL 1+4 VOLTAGE LOW > < F2: TROUBLE CODE TABLE - Trouble Code 42 EST LINE COIL CYL 1+4 VOLTAGE HIGH

Multec-S X 14 XE /  X 16 XE (L)5            F2:TROUBLE CODE TABLE

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when ...

63

EST LINE COIL CYL 2+3 VOLTAGE LOW

14

·   System is not in TECH 1 diagnostic mode

·   Final stage diagnosis in control unit:

     Incorrect voltage condition at output Ter. F14 of control unit (ignition signal EST-B) is recognised 6 times (short circuit to ground)

 

Effects:

·   The injectors for cylinder pair 2-3 are switched off

·   Oxygen sensor regulation is switched off, i.e. open oxygen sensor loop

·   The engine telltale is ON

 

 

 

 

If trouble codes 63 and 64 are recognised simultaneously:

·   Engine not running:     The injectors for cylinder pairs 1-4 and 2-3 are switched off

·   Engine running:           Only the injector pair where the fault occurred first is switched off.

 

or:

 

·   System is not in TECH 1 diagnostic mode

·   Final stage diagnosis in control unit:

     Incorrect voltage condition at output Ter. F14 of control unit (circuit interruption)

·   With ignition ON, the fault is recognised immediately

 

Effects:

·   The injectors for cylinder pairs 1-4 and 2-3 are switched off

·   The engine does not start

·   The engine telltale is ON

 

 

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 14 SPARK ADVANCE

F2: TROUBLE CODE TABLE - Trouble Code 64 EST LINE COIL CYL 1+4 VOLTAGE LOW > < F2: TROUBLE CODE TABLE - Trouble Code 42 EST LINE COIL CYL 1+4 VOLTAGE HIGH