vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: DATA LIST - Test Step 24 VEHICLE SP. PULSE > < F0: DATA LIST - Test Step 21 DEC. FUEL CUTOFF

Multec (X 12 SZ / X 16 SZ) F0: DATA LIST

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

23

VEHICLE SPEED

Test drive

The TECH 1 display indicates the actual speed, the speedometer display may deviate from approx. 5 to 10 % this by

50 km / h, 30 MPH

24

B 2 /D 1

Trouble - shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

 

·   Controlled canister purge valve defective.

·   Ignition ON

 

Instrument illumination ON

Engine telltale H 30 ON

·   Fuse F 17 (Corsa - B) F7 (Astra - F) defective.

·   Fault in instrument illumination.

·   For Corsa - B (Astra - F page 75):

 

 

 

·   Ignition OFF

·   Disconnect plug X 5 from control unit to odometer frequency sensor in instrument.

·   Measure voltage:

from:   plug X 5 Ter. 7

to:        ground

 

less than 0.1 V

·   Short circuit in wiring harness

from:   plug X 5 Ter. 7

to:        battery +

·   Triple info Display defective.

 

·   Ignition ON

·   Jack up the vehicle at the front, rotate front wheels slowly

·   Measure voltage:

from:   plug X 5 Ter. 7, wiring harness side

to:        ground

 

Alternately less than 1 V and greater than 10 V

Constantly greater than 11 V

·   Short circuit to voltage

from:   plug X 5 Ter. 7

to:        ignition lock S 1 Ter. 15

 

Constantly less than 0.1 V

·   Short circuit in wiring harness

from:   plug X 5 Ter. 7

to:        ground

 

·   Odometer frequency sensor defective

·   Connect plug

·   Rotate front wheels slowly, until a voltage greater than 10 V is present at plug X 5 Ter. 7 to ground

·   Pulse lead to ground:

from:   X 5 Ter. 7 wiring harness side

to:        ground

·   Press Triple info Display keys for 4 s

 

Display Test: vehicle speed is displayed

·   Lead interruption

from:   X 5 Ter. 7

to:        Triple info Display plug X 23 Ter. 12

 

·   Triple info Display defective.

·   Ignition OFF

·   Disconnect plug K 57

·   Ignition ON

·   Measure voltage:

from:   X 5 Ter. 7, control unit side

to:        ground

 

less than 0.1 V    

·   Short circuit in wiring harness

from:   X 5 Ter. 7

to:        battery +

·   Ignition OFF

·   Using multimeter, measure resistance:

from:   X 5 Ter. 7

to:        control unit plug K 57 Ter. B 2

 

less than 2 W

·   Lead interruption

from:   X 5 Ter. 7

to:        control unit plug K 57 Ter. B 2

·   Using multimeter, measure resistance:

from:   X 5 Ter. 7

to:        ground

 

greater than 100 kW

·   Short circuit in wiring harness

from:   X 5 Ter. 7

to:        ground

·   Connect all plugs

·   Ignition ON

·   Pulse plug X 5 Ter. 7 in assembly to ground

 

TECH 1 indicates a speed greater than 0 km / h (0 mph)

·   Control unit defective

·   For Astra - F:

 

·   Ignition OFF

·   Disconnect plug X 9 from control unit to odometer frequency sensor in instrument.

·   Measure voltage:

from:   plug X 9 Ter. 4

to:        ground

 

less than 0.1 V

·   Shorl circuit in wiring harness

from:   plug X 9 Ter. 4

to:        battery +

·   Multi Info Display defective

 

·   Ignition ON

·   Jack up the vehicle at the front, rotate front wheels slowly

·   Measure voltage:

from:   plug X 9 Ter, 4, wiring harness side

to:        ground

Alternately less than 1 V and greater than 10 V

Constantly greater than 11 V

·   Short circuit to voltage

from:plug X 9 Ter. 4

to:        ignition lock S 1 Ter, 15

 

Constantly less than 0.1 V

·   Short circuit in wiring harness

from:   plug X 9 Ter. 4

to:        ground

 

·   Odometer frequency sensor defective

·   Connect plug

·   Rotate front wheels slowly, until a voltage greater than 10 V is present at plug X 9 Ter. 4 to ground

 

 

 

·   Pulse lead to ground:

from:   X 9 Ter. 4 wiring harness side to: ground

 

 

 

·   With TECH 1, select MID test step No. 21

TECH 1 indicates speed higher than 0 km /h (0 mph)

·   Lead interruption

from:   X 9 Ter. 4

to:        Multi - Info - Display plug X 20 Ter. 20

 

·   Multi Info Display defective.

 

·   Ignition OFF

·   Disconnect plug K 57

·   Ignition ON

·   Measure voltage:

from:   X 9 Ter. 4, control unit side

to:        ground

 

less than 0.1 V

·   Short circuit in wiring harness

from:   X 9 Ter. 4

to:        battery +

·   Ignition OFF

·   Using multimeter, measure resistance:

from:   X 9 Ter. 4

to:        control unit plug K 57 Ter. B 2

 

less than 2 W

·   Lead interruption

from:   X 9 Ter. 4

to:        control unit plug K 57 Ter. B 2

·   Using multimeter, measure resistance:

from:   X 9 Ter. 4

to:        ground

 

greater than 100 kW

·   Short circuit in wiring harness

from:   X 9 Ter. 4

to:        ground

·   Connect all plugs

·   Ignition ON

·   Pulse plug X 9 Ter. 4 in assembly to ground

TECH 1 indicates speed higher than 0 km / h (0 mph)

·   Control unit defective

 

 


Related Literature Units
-F2:Trouble Code Table - Trouble Code 24 NO VEHICLE SPEED SIGNAL

F0: DATA LIST - Test Step 24 VEHICLE SP. PULSE > < F0: DATA LIST - Test Step 21 DEC. FUEL CUTOFF