vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:Trouble Code Table - Trouble Code 22 THROTTLE POSIT. SENSOR VOLTAGE LOW > < F2:Trouble Code Table - Trouble Code 19 INCORRECT RPM SIGNAL

 

Table 2, Multec (X 12 SZ / X 16 SZ) F2: TROUBLE CODE

 

 

Trouble

Code

Information Sensor

Cause of Fault

Remedy in F0:

DATA LIST

Trouble Code Storage when...

21

THROTTLE POSIT. SENSOR VOLTAGE HIGH

04

·     Intake manifold absolute pressure less than 700 hPa. Engine running in partial load range, operating temperature

·     Engine speed lower than 4000 rpm

·     Following trouble codes not stored: 33, 34

·     Throttle valve potentiometer voltage greater than 4 V

·     The above conditions must be fulfilled for at least 2 s

 

If trouble code 21 was recognized, the control unit calculates with a replacement characteristic curve dependent on the engine speed and intake manifold pressure.

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 04 TPS SIGNAL

F2:Trouble Code Table - Trouble Code 22 THROTTLE POSIT. SENSOR VOLTAGE LOW > < F2:Trouble Code Table - Trouble Code 19 INCORRECT RPM SIGNAL