vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:Trouble Code Table - Trouble Code 93 QUAD DRIVER MODULE (QDM) > < F2:Trouble Code Table - Trouble Code 76 CONTINUOUS TORQUE CONTROL

Table 2, Multec (X 12 SZ / X 16 SZ) F2: TROUBLE CODE

 

 

Trouble

Code

Information Sensor

Cause of Fault

Remedy in F0:

DATA LIST

Trouble Code Storage when...

81

INJECTOR VALVE

VOLTAGE HIGH

 

33

·   The control unit has determined a voltage level at the outputs to the injectors which does not correspond to the nominal value (5 consecutive 12 V to 0 V transitions were not registered)

·   Short circuit to battery voltage or circuit interruption

·   The fault is recognized immediately after the engine is started.

 

If trouble code 81 was recognized, the injector is no longer actuated.

 

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 33 INJECTION PULSE

F2:Trouble Code Table - Trouble Code 93 QUAD DRIVER MODULE (QDM) > < F2:Trouble Code Table - Trouble Code 76 CONTINUOUS TORQUE CONTROL