MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) Quick Check F0:DATA LIST
No.
TECH 1 Display
Conditions for Checking
Nominal Value
Trouble Codes
Ter-
minal
30
KNOCK RTD.CYL3,2
Engine running at idle speed, operating temperature
Engine running in partial load range, operating temperature
Note:
As the engine does not have a camshaft sensor, the control unit cannot determine which cylinder is subject to knock.
No. 2 or No. 3
Drive off in 3rd gear
0 °CA
lower than 1 °CA
higher than 1 °CA
18
A 1