Gearshift - Poor handling and noisy
Models:
Corsa-B 93.5..., Tigra 95..., Astra-F 92..., Vectra-B 96...,
Sintra 97..., Astra-G 98...
Engines:
All
Option:
MT
Group:
K - Clutch /Transmission
Troublecode:
Non
Complaint:
Poor Performance
Hard gear operation and noises.
Cause:
Insufficient lubrication by unsuitable lubricant.
Production Solution:
Special part:
No
Remedy:
Remove gearshift lever and clean off old lubricant,
lubricate gearshift lever with suitable silicone grease and re-install.
For removal of the gearshift lever clamp off bellows from
the center console. Release guide clamp and remove bolt. Remove gearshift lever.
Lubricate gearshift lever (1) and gearshift bar (arrows) with silicone grease
(pink) by using a brush. Insert gearshift lever into gearshift housing.
Install bolt and bar guide clamp. Clamp bellows onto center console.
Adjustment of the gearshift is not required.
|
|
Further information for removal and installment of the
gearshift
lever - see working procedure "Remove and install
gearshift lever" according to the Service Instruction of the relevant
carline.
Wipe off the old grease from surface of the gearshift lever
ball
in the hatched area (1) . If a rubber seal ring (2) is
fitted to the gearshift lever ball, examine it, and in case of lack of grease
or unsuitable lubricant contaminated with abresive particles exchange rubber
seal. Dark colored grease due to light
abrasives is acceptable and does not influence the
function.
|
|
Parts: Part-No.: Cat.-No.:
Silicone grease (pink) 90
167 353 19 70 206
Labouroperation: TC: Hours:
T8 125 70 Lubricate gearshift lever 90 0.2
hrs.
The regular warranty procedure should be used for claiming
Set-up-time