Fuel Tank Sensor, Replace
 Remove, Disconnect Uncover installation opening under rear seat and take off cover. Disconnect wiring harness plug and pull fuel gauge at shackle out of fuel pump housing fixing point.
 Install, Connect | 
|
Guide fuel tank sensor into guide on fuel pump housing and engage. Connect wiring harness plug. Close installation opening.
 Important! Check function. Switch on ignition, fuel pump must run for approx. 2 sec. | 
|
 Assemble Install fuel pump in housing.
Important! Fuel pump locking tabs must sit evenly in housing (2).
Assemble | 
|
Attach fuel screen to fuel pump. Connect and tighten return hose to electric fuel pump closure cover (arrow). Connect wiring harness plug to fuel pump. Illustration shows the fuel pump housing removed for clearer representation. | 
|
Install, Connect Install and engage electric fuel pump in fuel tank.
Important! All three locking tabs must engage. Illustration shows the fuel pump housing (1) removed for clearer representation.
Important! Install rubber seal ring in cover. Lightly oil rubber seal ring.
Install, Connect | 
|
Lock electric fuel pump with retaining ring and KM-797. Connect fuel pump wiring harness plug and fuel tank sensor. Connect and tighten feed and return hoses. Close installation opening with cover. | 
|
|
