Remove ribbed V-belt - see corresponding operation in group J. Unscrew expandable hose and intake line hose from power steering pump. Fluid escapes. Place collecting basin underneath. Observe safety regulations. Unbolt power steering pump from bracket on front engine mount (see illus. II, arrows) and remove.
Install, Connect Insert power steering pump into bracket and tighten - tightening torque 20 Nm / 15 lbf. ft. Attach intake line hose to pump - tightening torque 12 Nm / 9 lbf. ft. Attach expandable hose to pump - tightening torque 28 Nm / 21 lbf. ft. Install ribbed V-belt - see corresponding operation in group J. Top up hydraulic system and check for leaks - see operation "Hydraulic System, Top Up / Bleed". |