Vauxhall Workshop Service and Repair Manuals

Recommended Torque Values Steering, General  

	Nm
Steering column shear plate fastening nut to instrument panel	22 1)
Brake servo to bracket	22
Rear damping block bracket to transmission	60
Rear damping block bracket to damping block	60 1)
Clutch retainer to bulkhead	20
Master brake cylinder to brake servo	22
Refrigerant line to receiver/dryer flange	20
Refrigerant line TXV valve	7
Shift guide clamp bolt	15
Tie rod end lock nut to tie rod	50
Control arm to front frame	45 + 45 ° + 15 ° 1) 2) 3)
Steering gear to bulkhead	22

1)  Use new fastening nut.  

2)  Use new fastening bolt  

3)  Note installation instructions  

Recommended Torque Values - Steering, General (Continued)  

	Nm
Steering wheel to steering shaft	20 1)
Front left engine mount to chassis side member	65
Upper refrigerant line to compressor	30
Tie rod (axial joint) to steering rack	70
Tie rod end to steering knuckle	35 2)
Lower refrigerant line to refrigerant line for compressor	27
Intermediate shaft to steering pinion	22
Intermediate shaft to steering shaft	22

1)  Use new lock tab  

2)  Use new fastening nut.