Vauxhall Workshop Service and Repair Manuals

No.

Tech 1 Display

Conditions for checking

Nominal Value

Trouble Codes

Terminal

19

FUEL/CRANK SW.

Only vehicles with immobiliser:

Ignition OFF

Driver's door not fully closed

Turn key 90° to the right in driver's door

(arm anti-theft warning system)

Wait at least 10 s

Open driver's door

Turn key 45° to the left in driver's door

(disarm anti-theft warning system)

CLOSED

OPEN

ALARM is triggered

11, 23

19

FUEL/CRANK SW.

Important:

The type of alarm that is triggered depends on the programmed country code:

Country code "D":      horn (interval note) and turn signals

Country code "CH":   horn only (continual note)

Country code "NL":   horn (continual note) and turn signals

Country code "GB":   horn only (interval note)

Notes on trouble-shooting

Nominal Value

Cause of Fault

Observe the note on test procedure, test step no. 17

In the event of a fault, first carry out following test steps:

·   Test step no. 03 DOORS SWITCH

·   Test step no. 14 DISARM SIGNAL

·   Test step no. 15 ARM SIGNAL

If nominal values are attained:

·   Control unit K94 defective