Vauxhall Workshop Service and Repair Manuals

Conditions for Checking

Nominal Value

Affected terminals:                   12, 24

Possible trouble codes:             -

Ignition ON

Press key F5 in the system main menu, select the desired test using the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.

Start actuator test

TECH 1 display:

TURN SIG. RELAY

alternating

INACTIVE 0V

and

ACTIVE  12V

LEFT and RIGHT turn signal lamps flash simultaneously

Note:

The turn signal lamps are actuated at a frequency of 0.5 Hz (switch-on period 1 s).

The check is completed after a maximum of 30 s.