vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Table 7, F7:PROGRAMMING Nr. 01 PROGRAMMING COUNTRY CODE > < Table 5, F5:ACTUATOR TEST NR. 03 TURN SIG. RELAY

Corsa B

Table 5, F5:ACTUATOR TEST

 

No.

Tech 1 Display

Conditions for checking

Nominal Value

Trouble Codes

Terminal

04

FUEL/CRANK SW.

Vehicles without immobiliser

Ignition ON

Press key F5 in the system main menu.

Follow the instructions on TECH 1

Start actuator test

 

 

 

 

Note:

 

The immobiliser relay in question here is used internally in the control unit. The relay is actuated at a frequency of 0.5 Hz (switch-on period 1 s).

The check is completed after a maximum of 30 s.

 

 

 

 

 

alternating

CLOSED

and

OPEN

 

The relay in control unit K94 switches audibly

-

-

 

 

 

 

 

 

Notes on trouble-shooting

Nominal Value

Cause of Fault

 

 

·   Control unit K94 defective

 

 

 

 

 

Table 7, F7:PROGRAMMING Nr. 01 PROGRAMMING COUNTRY CODE > < Table 5, F5:ACTUATOR TEST NR. 03 TURN SIG. RELAY