T-Connector - Headlamp High Pressure Washer System, Replace
T-Connector, Headlamp High Pressure Washer System, Replace
Remove, Disconnect
Remove front panelling - see operation "Front Panelling, Remove and Install" in group "A". Water reservoir for headlamp high-pressure washer system - see operation "Water Reservoir - Headlamp High-pressure Washer System, Replace". Disassemble hose clamps on distributor piece and detach water hose from pipe connection. Remove distributor piece for headlamp high-pressure washer system.
Install, Connect
Secure distributor piece to water hose with hose clamps. Water reservoir for headlamp high-pressure washer system. Front panelling.
Remove, Disconnect 
Install, Connect 