Corsa B
|
Step E - Concluding Operations E1 - Reassemble vehicle
• If possible, perform step E2 before reassembling panelling.
• Fasten wiring harnesses at the original point using genuine parts, e.g. grooved pipes, wiring trough brackets, cable ties, clips etc. from the "Service" department.
• Reattach panelling and attaching parts.
E2 - Carry out function check
• Connect battery.
• Carry out function test.
Ensure that the wiring harness repair was successful.
E3 - Program volatile memories
• Reprogram volatile memories and enter code to reactivate audio equipment after completing all work.
Step F - Environmental Protection F1 - Parts disposal
• Defective wiring harnesses, wiring harness plugs, etc. must be disposed of as specified by national regulations, provided that there is no obligation to return parts for warranty reasons.
• Keep superfluous spring-finger connectors with lead ends and other components for further repairs.
|
