|
Rear Quarter Panel (Partial Replacement), Replace
- Models F 08, F 08 & W5L
 Remove
|
| 1. |
Detach attaching parts
|
| 2. |
Drill away side panel
Note: Observe size of
new part!
Note: Special economy
components are provided. The cutting lines are provided for
component replacement.
Note: Only operations
deviating from the operation "Side Panel, Replace" are
described.
| 1. |
Partial replacement, front |
| 2. |
Partial replacement, rear |
|
|
Install
|
| 3. |
Adjust side panel (partial replacement) and fit
Note: Provide an
allowance of approx. 10 mm for
overlap.
| • |
Turn down flanges either on the body or new component
|
| • |
Weld in side panel, plug weld at overlap
|
|
| 4. |
Seal body seams
| • |
Seal cavity
Note: Grind a bevel of
30° to avoid edge marks.
|
|
|
|
