Weatherstrip – Front Door, Remove and
Install (Model F08)
Remove
1. |
Remove sill inner panelling .
|
2. |
Remove front door weatherstrip
|
3. |
Attach front door weatherstrip
Note: If the joint (2)
in the front door weatherstrip is damaged, bond the joint with
rubber adhesive. Apply rubber adhesive to transition piece. Bond
ends of weatherstrip together. Use adhesive tape on the body flange
at the marked points (1) (part no.: 90350813/catalogue no.:
157950).
|
|
|
Install
4. |
Install sill inner panelling
Note: The inner sealing
lip of the front door weatherstrip is located above the inner
panelling.
|
|