Crank Drive Panel, Remove and Install
Remove
1. |
Release weatherstrip of sliding sunroof (1) in the area of the
crank drive panel
|
2. |
Remove crank (2), sliding sunroof (manual sliding sunroof) or
operating switch for sliding sunroof (electric sliding sunroof)
|
4. |
Remove interior light panel (4)
Note: For vehicles with
optional equipment, the interior lamp panel is equipped with the
following components:
- Microphone for conference device
- Ultrasonic sensors for anti-theft warning system
|
5. |
Remove crank drive panel (6)
• |
Unlatch and disconnect wiring harness plug (5)
|
• |
Unscrew and remove bolts
|
• |
Press off 2x fastening plug with KM-569
|
|
|
|
Install
6. |
Install panel, crank drive
• |
Press in 2x fastening plug
Note: Replace damaged
attaching plugs.
|
• |
Connect wiring harness plug
|
|
7. |
Install interior light panel
|
8. |
Install interior light
|
9. |
Install crank for sliding sunroof (manual sliding sunroof) or
operating switch for sliding sunroof (electric sliding sunroof)
|
10. |
Fasten weatherstrip for sliding sunroof
|
|