Inner Panelling – C-Pillar, Remove and
Install (Model F08)
Remove
1. |
Remove load compartment cover
|
2. |
Fold rear seat backrest forwards
|
3. |
Release tailgate weatherstrip in the area of the C-pillar
|
4. |
Remove cap of guide fitting
|
5. |
Detach seat belt at C-pillar guide fitting (1)
|
6. |
Unclip C-pillar inner panelling
Note: In vehicles with
curtain airbag, the inner panelling for the upper B-pillar is also
fitted with a clip. All the fastenings of the upper inner C-pillar
(bolts, clips) must be replaced with original parts from Aftersales
if damaged (see illustration I).
• |
Unclip 6x clip (arrows)
|
|
|
|
Install
7. |
Clip in C-pillar inner panelling
|
8. |
Seat belt guide fitting on C-pillar
|
9. |
Fasten cap on guide fitting
|
10. |
Install tailgate weatherstrip
|
11. |
Return rear seat backrest to original position
|
12. |
Install load compartment cover
|
|