|
Inner Panelling – Rear Sill, Remove and
Install (Model F 68)
 Remove
| 1. |
Remove driver's side storage compartment 
|
| 2. |
Remove rear seat backrest, single component
|
| 3. |
Remove rear seat backrest, divided
|
|
| 4. |
Remove sill inner panelling
| • |
Prise out inner sill panelling (1) of lower B-pillar
|
| • |
Unscrew bolt (2) on inner sill panelling in the area of the
rear seat backrest
|
| • |
Detach rear door weatherstrip in area of inner panelling
|
| • |
Unclip sill inner panelling at the positions shown (arrows)
| – |
Unclip 8x clip (arrows)
|
|
|
|
Install
| 5. |
Install sill inner panelling
| • |
Fasten rear door weatherstrip in the area of the inner
panelling
|
| • |
Tighten bolt on inner sill panelling in the area of the rear
seat backrest
|
|
| 6. |
Install rear seat backrest, single component
|
| 7. |
Install rear seat backrest, divided
|
| 8. |
Install storage compartment, driver's side
|
|
