|
Inner Panelling – Upper B-Pillar, Remove and
Install (Model F 68)
 Remove
|
| 1. |
Prise off cover (1)
Note: In vehicles with
curtain airbag, the inner panelling for the upper B-pillar is also
fitted with a clip. This clip is marked Airbag. all the fastenings
of the upper inner B-pillar (bolts, clips) must be replaced with
original parts from Aftersales if damaged (see illustration I).
|
| 2. |
Unclip inner panelling, upper B-pillar (2)
|
| 3. |
Remove sill storage compartment 
|
| 4. |
Remove attachment point (3) for seat belt on front seat
| • |
Unscrew and remove bolt (arrow)
|
|
| 5. |
Unthread seat belt (4) out of B-pillar inner panelling
|
| 6. |
Remove B-pillar inner panelling
|
|
Install
| 7. |
Guide seat belt through inner panelling of B-pillar
|
| 8. |
Illustration shows routing of belt strap in upper B-pillar
inner panelling
|
1=
|
Belt strap of front seat belt
|
|
2=
|
Front seat belt height adjuster
|
|
3=
|
B-pillar inner panelling.
|
|
|
|
| 9. |
Fit attachment point of front seat belt to front seat
Note: Insert bolt for
seat belt into front seat with bolt locking compound
|
| 10. |
Install sill storage compartment
|
| 11. |
Clip in upper B-pillar inner panelling
|
| 13. |
Check function of seat belt height adjuster and seat belt reel
retractor.
Note: To ensure the
function of the front seat belt, the routing of the belt strap in
the B-pillar inner panelling must be correct.
|
|
